You have no items to compare.
LATAFINISH 2-in-1 WALL PUTTY – FINE FINISH
This 2-in-1 wall putty is a unique formulation of white cement and high performance chemicals and polymers which can be applied on damp as well as dry surfaces.
The Wall Surface to be applied with Wall Putty should be Smooth Cement Plaster (Cement: Sand preferably in the ratio of 1:6 ) Surface free from Structural Crack & having been cured for 28 days.. The surface should be free from dirt, oil, grease and other loosely adhered foreign materials.
Surface Preparation –
IMPORTANT TO ENSURE THAT CEMENT PLASTER SURFACE SHOULD BE PRE WET TO SUCH AN EXTENT THAT IT SHOULD NOT ABSORB WATER FROM PUTTY COAT .
Mix LataFinish Wall Putty with around 35% of clean/potable water to make a paste of workable consistency . The mixing has to be done till a uniform paste is prepared. Once the paste is prepared it is left for 5 to 10 minutes before application to ensure complete reactions of admixtures present in putty. Mix only that much quantity of putty paste which can be used in 2 hours time.
|Type of Product||Wall Putty|